D-Link DGS-6608 — руководство по команде DVMRP для интерфейсов VLAN [300/1106]

Превью страниц Страница 300 / 1106

DGS-6600 Series Switch ip dvmrp

CLI Reference Guide

290

ip dvmrp

Use this command to enable DVMRP on the current interface. Use the no form to

disable DVMRP on the interface.

ip dvmrp

no ip dvmrp

Syntax None.

Default Disabled.

Command Mode VLAN interface configuration.

Usage Guideline This command is only valid for the VLAN interface.

The VLAN interface will have DVMRP protocol enabled (or disabled).

Before enabling DVMRP function on an interface, it is necessary to enable IP

multicast routing with the ip multicast-routing command in global configuration

mode.

Only one multicast routing protocol can be enabled on an interface, make sure

no other multicast routing protocol is configured before DVMRP is enabled. If

another protocol is enabled, an error message is displayed.

Example This example shows how to enable the DVMRP protocol on the interface

VLAN 1.

Verify the settings by the show ip dvmrp interface command.

Switch(config)# interface vlan1

Switch(config-if)# ip dvmrp