D-Link DGS-6608 — настройка LLDP Management Address для сетевых интерфейсов [442/1106]

Превью страниц Страница 442 / 1106

DGS-6600 Series Switch m lldp management-address

CLI Reference Guide

432

lldp management-address

To configure management address which will be advertised on the physical

interface, use the lldp management-address command. Use the no form of this

command to remove the settings.

lldp management-address [IP-ADDRESS | IPV6-ADDRESS]

no lldp management-address [IP-ADDRESS | IPV6-ADDRESS]

Default No LLDP management address is configured (no Management Address TLV is

sent).

Command Mode Interface configuration.

Usage Guideline The command is available for physical port configuration. This command

specifies the IPv4/IPv6 address which is carried in Management Address TLV

on the specified port. If an IPv4/IPv6 address is specified, but the address is

not one of the addresses of system interfaces, then the address will not be sent.

When no optional address specified along the command lldp management

address, the switch will find least IPv4 and IPv6 address of the VLAN with

the smallest VLAN ID, as default IPv4 and IPv6 address respectively. If no

applicable IPv4/IPv6 address, no management address TLV will be adver-

tised. Once user configures an address (no matters what it is IPv4 or IPv6

address), both of the default IPv4 and IPv6 management address become inac-

tive and won't be sen t. The default IPv4 or IPv6 address will be active again

when the configured address is removed. Multiple IPv4/IPv6 management

addresses can be configured by setting this command multiple times.

Use the command no lldp management-address without specifying manage-

ment address to disable management address advertising in LLDPDUs.

If there is no management address in the list, no Management Address TLV

will be sent.

Example This example shows how to enable eth3.1 and eth3.2 for setting management

address entry (ipv4).

This example shows how to enable eth3.3 and eth3.4 for set management

address entry (ipv6).

Syntax Description

IP-ADDRESS (Optional) The IPv4 address which is carried in Management Address TLV.

IPV6-ADDRESS (Optional) The IPv6 address which is carried in Management Address TLV.

When no IPv4 or IPv6 address is input for the command lldp management-

address, the switch will find the least IPv4/IPv6 address if the smallest VLAN.

Switch(config-if)# interface range eth3.1-3.2

Switch(config-if)# lldp management-address 10.1.1.1