D-Link DGS-6608 — oSPF Interface Command Reference for IPv6 Configuration [821/1106]

Превью страниц Страница 821 / 1106

DGS-6600 Series Switch m show ipv6 ospf interface

CLI Reference Guide

811

show ipv6 ospf interface

To display OSPF-related interface information, use the show ipv6 ospf

interface command.

show ipv6 ospf interface [IFNAME]

Default None.

Command Mode User EXEC.

Usage Guideline None.

Example show ipv6 ospf interface Standard Output Example: The following is sample

output from the show ipv6 ospf interface command.

The result after executing this command is as follows.

Syntax Description

IFNAME (Optional) Interface type and number. If no option is specified, applying the

command displays the entire IPv6 OSPF process.

Switch > enable

Switch # show ipv6 ospf interface

vlan2 is up, line protocol is up

Interface ID 1026

IPv6 Prefixes

fe80::a01:2ff:fe36:2/64 (Link-Local Address)

3ffe:4::30/64

OSPFv3 Process (null), Area 0.0.0.1 (active)

MTU 1500, Instance ID 0

Router ID 10.76.37.30, Network Type BROADCAST, Cost: 1 (default)

Transmit Delay is 1 sec, State BDR, Priority 1

Designated Router (ID) 10.76.37.3

Interface Address fe80::219:5bff:fef5:2cc1

Backup Designated Router (ID) 10.76.37.30

Interface Address fe80::a01:2ff:fe36:2

Timer intervals configured, Hello 10, Dead 40, Retransmit 5

Hello due in 0DT0H0M5S

Neighbor Count is 1, Adjacent neighbor count is 1

Hello received 48 sent 46, DD received 5 sent 3

LS-Req received 1 sent 1, LS-Upd received 11 sent 10

LS-Ack received 8 sent 6, Discarded 00