D-Link DGS-6608 — настройка максимальной задержки отката в сетевых коммутаторах [70/1106]

Превью страниц Страница 70 / 1106

DGS-6600 Series Switch backoff maximum

CLI Reference Guide

backoff maximum

Use the backoff maximum command to configure the maximum back-off delay

time. Use no form of this command to restore the default value.

backoff maximum SECONDS

no backoff maximum

Default 600 seconds.

Command Mode MPLS router configuration mode.

Usage Guideline The LDP back-off mechanism prevents two incompatibly configured LSRs from

engaging in an endless sequence of session setup failures. If a session setup

attempt fails due to an incompatibility, the active LSR delays its next attempt (that

is, backs off), and then retries the session establishment.

The delay begins at 15 seconds, and it is increased exponentially with each

successive failure until the maximum back off delay is reached. The maximum

[back off] delay is configurable, with the minimum amount being 120 seconds.

The default value is 600 seconds.

Example This example shows how to configure the maximum back-off delay time to 1000

seconds.

The user can verify their settings by entering show mpls ldp parameter

command.

Syntax Description

SECONDS The maximum back-off delay time. The range is 120-65535 seconds.

Switch(config-mpls-router)# backoff maximum 1000