D-Link DGS-6608 — руководство по CLI для загрузочного образа коммутаторов [99/1106]

Превью страниц Страница 99 / 1106

DGS-6600 Series Switch boot image

CLI Reference Guide

As this command apply to active control management unit and high-availability

the boot image and boot image list will be also applied to the standby control

management. In order to make high-availability function successfully, you have

to make sure all available media are same at both active and standby control

management units. If the available mediums are not present at the same

interface at both active and standby control units, an error message should return

for boot image command and the command will be failed.

Examples The following example shows how to specify the switch to use the image file

named switch-image1.bin as the boot image file for the next startup and the

previous boot image, flash:\switch-image0.bin becomes the secondary boot

image file in the list and changes the status to the backup boot image.

Verify the settings by entering the show boot command.

The following example shows how to check a file yyy-image to see file

information before associate it with boot image command:

the following example shows the error message for reference as the active

control unit has CF card installed at cf1, but standby control unit did not have CF

card installed.

Switch# configure terminal

Switch(config)#boot image flash:\images\switch_image1.had

Checking image at local flash:\images\switch_image1.had ... Done.

Update bootlist ....... Done.

Success

Switch# configure terminal

Switch(config)# boot image check flash:\yyy-image

Image information

Version : images version

Description:image file for DGS-XXXX

Model :DGS-XXXX images version

Build time :week month day hour:minutes:second year

Switch# configure terminal

Switch(config)# boot image cf1:\switch-image1.bin

Checking image at local cf1:\switch-image1.bin ...done

Verify image in standby control management unit ... .Fail

[error: cf1 media is not present at Standby control management unit!]

Switch(config)#