D-Link DGS-6608 — настройка адресного семейства IPv4 для маршрутизаторов [50/1106]

Превью страниц Страница 50 / 1106

DGS-6600 Series Switch m address-family ipv4

CLI Reference Guide

address-family ipv4

Use this command to enter address family configuration mode to configure a

routing session using standard IP Version 4 address prefixes. Use the no form of

this command to remove the IPv4 address family configuration from the running

configuration.

address-family ipv4 [unicast]

no address-family ipv4 [unicast]

Default Unicast prefix support is enabled by default when this command is entered

without any optional keywords.

Command Mode Router configuration.

Usage Guideline Routing information for address family IPv4 unicast is advertised by default for

each BGP routing session configured with the neighbor remote-as command

unless the no bgp default ipv4-unicast command is used before configuring the

neighbor remote-as command.

For all settings configured for IPv4 unicast, the settings also appear in BGP

router configuration mode. That is, for address-family associated settings, the

settings defined in IPv4 unicast address family mode is equivalent to the settings

defined in the router configuration mode.

To leave address family configuration mode and return to router configuration

mode without removing the existing configuration, enter the exit command.

Example This example shows how to enter address family configuration mode for the IP

Version 4 address family:

Syntax Description

unicast (Optional) Specifies IP Version 4 unicast address prefixes.

Switch(config)# router bgp 65100

Switch(config-router)# address-family ipv4

Switch(config-router-af)# exit

Switch(config-router)#