D-Link DGS-6608 — настройка команды ip pim register-checksum-include-data для маршрутизаторов [345/1106]

Превью страниц Страница 345 / 1106

DGS-6600 Series Switch ip pim register-checksum-include-data

CLI Reference Guide

335

ip pim register-checksum-include-data

Use this command to configure the option to calculate the Register checksum

over the whole packet. Use the no form of this command to disable calculating

the Register checksum over the whole packet.

ip pim register-checksum-include-data {group-list ACCESS-LIST-NAME}

no ip pim register-checksum-include-data

Default Disabled.

By default, the Register Checksum is calculated only over the header.

Command Mode Global configuration.

Usage Guideline This command is valid for SM mode and used to provide compatible inter-

operability with other manufacturer devices per the following:

This command is used to inter-operate with some legacy CISCO® manufactured

routers using older CISCO® IOS™ versions. This command is needed for the

first hop router for encapsulation of the register packet. This function needs to be

enabled in order to inter-operate with legacy CISCO® devices using older IOS™

versions.

If group-list is not specified, then the setting will be applied to all groups.

This command can be only specified once. The later applied command will

override the previous setting.

Example The following example shows how to enable register checksum over whole

packet.

Verify the settings by using the show ip pim command.

Syntax Description

group-list

ACCESS-LIST-NAME

Specifies the name of the basic IP access list name

Switch(config)# ip pim register-checksum-include-data