D-Link DGS-6608 — настройка логирования изменений соседей BGP для маршрутизаторов [93/1106]

Превью страниц Страница 93 / 1106

DGS-6600 Series Switch bgp log-neighbor-changes

CLI Reference Guide

bgp log-neighbor-changes

Use the bgp log-neighbor-changes command to enable logging of BGP

neighbor resets. Use no bgp log-neighbor-changes to disable the logging.

bgp log-neighbor-changes

no bgp log-neighbor-changes

Syntax None.

Default Disabled.

Command Mode Router configuration.

Usage Guideline This command enables logging of both BGP resets and alternating status

changes to use for troubleshooting purposes.

Unexpected neighbor resets might indicate high error rates or high packet loss in

the network and should be investigated.

This command enables logging of both BGP resets and alternating status

changes to use for troubleshooting purposes.

Unexpected neighbor resets might indicate high error rates or high packet loss in

the network and should be investigated.

The neighbor status change messages are not tracked if the bgp log-neighbor-

changes command is not enabled. The exception to this is for a reset reason,

which is always available as output of the show ip bgp neighbors commands.

The logs for BGP neighbor changes will display on the console.

Example This example shows how to enable logging of BGP neighbor changes for

autonomous system 65534:

Use the show logging buffer command to display the log for the BGP neighbor

changes.

Switch(config)# router bgp 65534

Switch(config-router)# bgp log-neighbor-changes