Planet WGS3-2820 [336/528] No mtu

User’s Manual of WGS3-2820/WGS3-5220

336

8.5.2 mtu

This command sets the maximum transmission unit (MTU) size (in bytes) for physical and port-channel (LAG) interfaces. For

the standard implementation, the range of <mtusize> is a valid integer between 1522-9216.

▫ Default 1522

▫ Format mtu <1522-9216>

▫ Mode Interface Config

8.5.2.1 no mtu

This command sets the default maximum transmission unit (MTU) size (in bytes) for the interface.

▫ Format no mtu

▫ Mode Interface Config

8.5.3 network javamode

This command specifies whether or not the switch should allow access to the Java applet in the header frame of the Web

interface. When access is enabled, the Java applet can be viewed from the Web interface. When access is disabled, the user

cannot view the Java applet.

▫ Default Enabled

▫ Format network javamode

▫ Mode Privileged EXEC

8.5.3.1 no network javamode

This command disallows access to the Java applet in the header frame of the Web interface. When access is disabled, the user

cannot view the Java applet.

▫ Format no network javamode

▫ Mode Privileged EXEC

8.5.4 network mac-address

This command sets locally administered MAC addresses. The following rules apply:

▫ Bit 6 of byte 0 (called the U/L bit) indicates whether the address is universally administered (b'0') or locally administered

(b'1').

▫ Bit 7 of byte 0 (called the I/G bit) indicates whether the destination address is an individual address (b'0') or a group

address (b'1').

▫ The second character, of the twelve character macaddr, must be 2, 6, A or E.

A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').

▫ Format network mac-address <macaddr>

▫ Mode Privileged EXEC

8.5.5 network mac-type

This command specifies whether the burned in MAC address or the locally-administered MAC address is used.

▫ Default burnedin