Planet WGS3-2820 [438/528] 9 encapsulation

User’s Manual of WGS3-2820/WGS3-5220

438

12.2.19 encapsulation

This command configures the link layer encapsulation type for the packet. The encapsulation type can be ethernet or snap.

▫ Default ethernet

▫ Format encapsulation {ethernet | snap}

▫ Mode Interface Config

"Note: Routed frames are always ethernet encapsulated when a frame is routed to a VLAN.

12.2.20 show ip brief

This command displays all the summary information of the IP.

▫ Format show ip brief

▫ Modes Privileged EXEC

User EXEC

▫ Default Time to Live

The computed TTL (Time to Live) of forwarding a packet from the local router to the final destination.

Routing Mode Shows whether the routing mode is enabled or disabled.

IP Forwarding Mode Shows whether forwarding of IP frames is enabled or disabled. This is a configured value.

Maximum Next Hops Shows the maximum number of next hops the packet can travel.

12.2.21 show ip interface

This command displays all pertinent information about the IP interface.

Format show ip interface <slot/port>

Modes Privileged EXEC

User EXEC

Primary IP Address

Displays the primary IP address and subnet masks for the interface.

This value appears only if you configure it.

Secondary IP Address

Displays one or more secondary IP addresses and subnet masks for the interface.

This value appears only if you configure it.

Routing Mode

Is the administrative mode of router interface participation.

The possible values are enable or disable. This value was configured into the unit.

Administrative Mode

Is the administrative mode of the specified interface. The possible values of this field are