Planet WGS3-2820 [484/528] 4 redistribute rip

User’s Manual of WGS3-2820/WGS3-5220

484

case. Simple - a route will not be included in updates sent to the router from which it was learned. Poisoned reverse - a route will

be included in updates sent to the router from which it was learned, but the metric will be set to infinity.

▫ Default simple

▫ Format split-horizon {none | simple | poison}

▫ Mode Router RIP Config

no split-horizon

This command sets the default RIP split horizon mode.

▫ Format no split-horizon

▫ Mode Router RIP Config

12.8.14 redistribute (RIP)

This command configures RIP protocol to redistribute routes from the specified source protocol/routers. There are five possible

match options. When you submit the command redistribute ospf match <match-type> the match-type or types specified are

added to any match types presently being redistributed. Internal routes are redistributed by default.

▫ Default metric—not-configured

match—internal

▫ Format for OSPF as source protocol

redistribute ospf [metric <0-15>] [match [internal] [external 1] [external 2] [nssa-external 1]

[nssa-external-2]]

▫ Format for other source protocol

redistribute {bgp | static | connected} [metric <0-15>]

▫ Mode Router RIP Config

no redistribute

This command de-configures RIP protocol to redistribute routes from the specified source protocol/routers.

▫ Format no redistribute {ospf | bgp | static | connected} [metric] [match [internal] [external 1] [external 2]

[nssa-external 1] [nssa-external-2]]

▫ Mode Router RIP Config

12.8.15 show ip rip

This command displays information relevant to the RIP router.

▫ Format show ip rip

▫ Modes Privileged EXEC

User EXEC

RIP Admin Mode

Enable or disable.