Planet WGS3-2820 [483/528] 1 ip rip send version

User’s Manual of WGS3-2820/WGS3-5220

483

▫ Mode Interface Config

no ip rip receive version

This command configures the interface to allow RIP control packets of the default version(s) to be

received.

▫ Format no ip rip receive version

▫ Mode Interface Config

12.8.11 ip rip send version

This command configures the interface to allow RIP control packets of the specified version to be sent.

The value for <mode> is one of: rip1 to broadcast RIP version 1 formatted packets, rip1c (RIP version 1 compatibility mode)

which sends RIP version 2 formatted packets via broadcast, rip2 for sending RIP version 2 using multicast, or none to not allow

any RIP control packets to be sent.

▫ Default rip2

▫ Format ip rip send version {rip1 | rip1c | rip2 | none}

▫ Mode Interface Config

no ip rip send version

This command configures the interface to allow RIP control packets of the default version to be sent.

▫ Format no ip rip send version

▫ Mode Interface Config

12.8.12 hostroutesaccept

This command enables the RIP hostroutesaccept mode.

▫ Default enabled

▫ Format hostroutesaccept

▫ Mode Router RIP Config

no hostroutesaccept

This command disables the RIP hostroutesaccept mode.

▫ Format no hostroutesaccept

▫ Mode Router RIP Config

12.8.13 split-horizon

This command sets the RIP split horizon mode. Split horizon is a technique for avoiding problems caused by including routes in

updates sent to the router from which the route was originally learned. The options are: None - no special processing for this