Planet WGS3-2820 [354/528] Set garp timer leave

User’s Manual of WGS3-2820/WGS3-5220

354

8.6.23 set garp timer join all

This command sets the GVRP join time for all ports and per GARP. Join time is the interval between the transmission of GARP

Protocol Data Units (PDUs) registering (or re-registering) membership for a VLAN or multicast group.

This command has an effect only when GVRP is enabled. The time is from 10 to 100 (centiseconds)

▫ Default 20 centiseconds (0.2 seconds)

▫ Format set garp timer join all <10-100>

▫ Mode Global Config

This command sets the GVRP leave time per port. Leave time is the time to wait after receiving an unregister request for a

VLAN or a multicast group before deleting the VLAN entry. This can be considered a buffer time for another station to assert

registration for the same attribute in order to maintain uninterrupted service time is 20 to 600 (centiseconds).

▫ Default 60 centiseconds (0.6 seconds)

▫ Format set garp timer leave <20-600>

▫ Mode Interface Config

#Note:

This command has an effect only when GVRP is enabled.

#Note:

This command has an effect only when GVRP is enabled.

8.6.25 set garp timer leave all

This command sets the GVRP leave time for all ports. Leave time is the time to wait after receiving an unregister request for a

VLAN or a multicast group before deleting the VLAN entry. This can be considered a buffer time for another station to assert