Planet WGS3-2820 [338/528] Serial baudrate

User’s Manual of WGS3-2820/WGS3-5220

338

"Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any

keystroke will also activate the new timeout duration.

▫ Default 5

▫ Format remotecon timeout <0-160>

▫ Mode Privileged EXEC

8.5.9.1 no remotecon timeout

This command sets the remote connection session timeout value, in minutes, to the default.

"Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any

keystroke will also activate the new timeout duration.

▫ Default 5

▫ Format no remotecon timeout

▫ Mode Privileged EXEC

8.5.10 serial baudrate

This command specifies the communication rate of the terminal interface. The supported rates are 1200, 2400, 4800, 9600,

19200, 38400, 57600, 115200.

Default 9600

Format serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200}

Mode Line Config

8.5.10.1 no serial baudrate

This command sets the communication rate of the terminal interface to 9600.

▫ Format no serial baudrate

▫ Mode Line Config

8.5.11 serial timeout

This command specifies the maximum connect time (in minutes) without console activity. A value of 0 indicates that a console

can be connected indefinitely. The time range is 0 to 160.

▫ Default 5

▫ Format serial timeout <0 - 160>

▫ Mode Line Config

8.5.11.1 no serial timeout

This command sets the maximum connect time (in minutes) without console activity to 5.

▫ Format no serial timeout

▫ Mode Line Config