Icom IC-207H [20/80] Setting a frequency

SETTING A FREQUENCY

■ Preparation

D Turning power ON/OFF

Push [PWR] for 1 sec. to turn power ON or OFF.

D Operating band

The IC-207H can receive/transmit on the 144 MHz and

430(440) MHz bands, or receive only on the avionics band

(USA version only).

Push [BAND] one or more times to select the desired operat-

ing band.

• The frequency changes to indicate the selected band.

• The operating band cannot be changed unless you are in VFO

mode (see right).

Push [BAND] one or more times to select the de-

sired operating band.

D VFO and memory modes

The transceiver has 2 normal operating modes: VFO mode

and memory mode.

Push [V/MHz] to select VFO mode when the transceiver is

not in VFO mode.

• If VFO mode is already selected, the digits below 100 kHz disap-

pear. In this case, push [V/MHz] again (or push twice depending on

version).

Push [VFO] to select VFO mode.

Push [PWR] for 1 sec.

BAND

Appears when memory mode

is selected.

VFO mode is selected.

VFO