Icom IC-207H [39/80] Call channel operation

CALL CHANNEL OPERATION

■ Calling up a call channel

Each band has an independent call channel to store a most-

often-used frequency for quick recall.

➀ Push [BAND] one or more times to select a band, if nec-

essary.

➁ Push [M/CALL] once or twice to display a large “C” in the

memory channel readout.

• While a call channel is displayed, pushing [BAND] toggles be-

tween the 2 call channels.

➂ Push [V/MHz] or [M/CALL] to exit the call channel.

Ä Push [BAND] to select the desired band, if nec-

essary.

Å Push [(MR)CALL] for 1 sec. to select the call

channel.

Ç Push [BAND] to toggle between the 2 call

channels.

■ Transferring call channel

contents

➀ Push [BAND] to select a band, if necessary.

➁ Select the call channel by pushing [M/CALL] once or twice.

•“C1” or “C2” appears—push [BAND] to toggle between them.

➂ Push [S.MW] momentarily, then rotate the tuning dial to se-

lect another memory channel to transfer.

• To transfer to the VFO, push and hold [(S.MW)MW] instead of

pushing momentarily.

➃ Push and hold [(S.MW)MW] to transfer when a momentary

push was used in the previous step.

Ä Push [BAND] to select the desired band, if nec-

essary.

Å Push [(MR)CALL] for 1 sec. to select a call

channel, then push [BAND] to select the other

call channel, if desired.

Ç Push [FUNC], then [EMW] momentarily.

• To transfer to the VFO, push [FUNC] then [EMW] in-

stead of pushing [EMW] momentarily.

É Push [FUNC] then [EMW] for 1 sec. to transfer

when momentarily pushing [EMW] in step Ç.

Large “C” shows a call

channel is selected.

Small “c” shows VFO mode

was selected from a call

channel.

CALL