Icom IC-207H [67/80] I demonstration display

OTHER FUNCTIONS

■ Squelch delay

During operation, received signal strength often ﬂuctuates.

This can result in annoying repeated opening and closing of

the squelch during reception of the same signal. The IC-207H

has a built-in squelch delay function which helps prevent this.

When both stations are operating from a ﬁxed location, this

function should be set to “short” e.g. packet operation.

➀ Push [PWR] to turn power OFF.

➁ While pushing [SET], turn power ON to enter initial set

mode.

➂ Push [SET] one or more times until “Sqt” appears.

• Pushing [MONI] reverses the order of selection.

➃ Rotate the tuning dial to

set the squelch delay to

“L” (long) or “S” (short).

➄ Push [PWR] momentarily

to exit initial set mode.

USING

INITIAL SET MODE

The display shows the squelch

delay function is set to short.

■ Demonstration display

A demonstration function is available at power ON. This func-

tion gives you a quick visual introduction to the function dis-

play indicators.

➀ While pushing [BAND], push [PWR] to turn power ON.

• The transceiver cycles through a visual tour of the function dis-

play indicators.

➁ Push any switch to exit demonstration mode and enter the

normal operating condition temporarily.

NOTE: The transceiver automatically returns to demon-

stration mode after 2 min. in which no operations are per-

formed. To deactivate the demonstration display

permanently, turn power OFF, then while pushing [BAND],

turn power ON again.