Icom IC-207H [29/80] Repeater operation

REPEATER OPERATION

■ Accessing a repeater

➀ Push [BAND] one or more times to select the desired band.

➁ Set the receive frequency (repeater output frequency).

(pgs. 15–19)

➂ Push and hold for 1 sec., one or more times, to se-

lect – duplex or + duplex.

•“DUP –” or “DUP” appears to indicate the transmit frequency for

minus shift or plus shift, respectively.

• When the auto repeater function is turned ON, (available for the

U.S.A. version only), steps ➁, ➂ are not necessary. (p. 31)

➃ Push [TONE] one or more times to turn ON the subaudible

tone encoder, according to repeater requirements.

• Refer to p. 26 for tone frequency settings.

• When the repeater requires a different tone system, see the page

at right.

➄ Push and hold [PTT] to transmit.

• The displayed frequency automatically changes to the transmit

frequency (repeater input frequency).

• The operating condition is automatically programmed into a

scratch pad memory. See p. 36 for details.

DUP

• If “oFF” appears, conﬁrm the offset frequency. (p. 27)

➅ Release [PTT] to receive.

➆ Push [MONI] to check whether the other station’s transmit

signal can be directly received or not.

➇ To return to simplex, push for 1 sec., once or twice,

to clear the “DUP” indicator.

➈ To turn OFF the subaudible tone encoder, push [TONE]

one or more times until no tone indicators appear.

DUP