Icom IC-207H [34/80] Memory operation

MEMORY OPERATION

■ General description

The transceiver has 150 regular memory channels, 10 scan

edge memory channels (5 pairs) plus 2 call channels (by de-

fault C1 is for VHF and C2 is for UHF, however both can be

set to VHF or both to UHF as desired); each of these can be

individually programmed with the following data.

• Operating frequency (pgs. 15–19)

• Duplex direction (DUP or DUP–) and its offset frequency

(pgs. 24, 25, 27)

• Subaudible tone encoder or tone squelch and its tone fre-

quency (pgs. 24–26)

• Skip information* (p. 42)

*Except for the scan edge memory channels.

■ Memory channel selection

D Using the tuning dial

➀ Push [M/CALL] once or twice to display “!”.

➁ Rotate the tuning dial to select the desired memory chan-

nel.

• Only programmed memory channels can be selected.

D Using [Y]/[Z] switches

Ä Push [BAND] to select the desired band, if nec-

essary.

Å Push [MR] to select memory mode.

Ç Push [Y] or [Z] several times to select the de-

sired memory channel.

• Pushing [Y]/[Z] more than 0.5 sec. activates a scan.

• If a scan is activated, push [Y] or [Z] again to stop it.

D Using the keypad

Ä Push [BAND] to select the desired band, if nec-

essary.

Å Push [MR] to select memory mode.

Ç Push [GENT] to activate the keypad for nu-

meral input.

É Push 2 appropriate digit keys to input a chan-

nel number.

• When inputting non-programmed channel numbers

the previous memory channel appears.

• To select scan edge channels, “B” and “A” can be

used for A and b respectively.

ENT