Icom IC-207H [22/80] I using y z switches

SETTING A FREQUENCY

■ Using the tuning dial

➀ Push [BAND] to select the desired band, if necessary.

➁ Rotate the tuning dial to set the frequency.

• If VFO mode is not selected, push the [V/MHz] to select VFO

mode.

• Frequency changes according to the selected tuning steps.

(p. 18)

➂ For the 1 MHz frequency setting, rotate the tuning dial after

pushing [V/MHz].

• Pushing [V/MHz] for 1 sec. starts a scan function. If this happens,

push [V/MHz] again to stop the scan.

■ Using [Y]/[Z] switches

Push [Y] or [Z] to set the selected band’s fre-

quency.

• If VFO mode is not selected, push [VFO] to select it.

• Frequency changes according to the selected tuning

steps. (p. 18)

• Pushing [Y] or [Z] for more than 0.5 sec. activates a

scan. If this happens, push [Y] or [Z] again to stop it.

NOTE: 1 MHz steps cannot be used via the [Y ]/[Z]

switches.

The display shows that the 1 MHz

tuning step is selected for the

VHF band.