![Icom IC-207H [32/80] I offset frequency](/img/pdf.png)
Icom IC-207H [32/80] I offset frequency
![Icom IC-207H [32/80] I offset frequency](/views2/1074416/page32/bg20.png)
5
REPEATER OPERATION
27
■ Offset frequency
➀ Push [BAND] to select the desired band.
➁ Select the mode/channel you wish to set the offset fre-
quency to, such as VFO mode or memory/call channel.
• The offset frequency can be independently programmed into
each mode or channel.
➂ Push [SET] one or more times until “DUP” appears and
flashes as shown above.
• Pushing [MONI] reverses the order of selection.
• Cancel the DTMF memory encoder in advance. (p. 48)
➃ Rotate the tuning dial to set the desired frequency.
• Selectable step increment is the same as the preset tuning step.
(p. 18)
• Use [V/MHz] for quick MHz setting.
➄ Push [V/MHz] to exit set mode.
USING
SET MODE
Separate setting for each band
The display shows that a
0.6 MHz (600 kHz) fre-
quency is set.
HI
1
9
5
DUP
Ä Push [BAND] to select the desired band, if nec-
essary.
Å Set the mode/channel you wish to set the off-
set frequency to, such as VFO mode or mem-
ory/call channel.
• The offset frequency can be independently pro-
grammed into each mode or channel.
Ç Push [FSET] one or more times until “DUP” ap-
pears and flashes as shown at left.
• Pushing [GENT] reverses the order of selection.
• Cancel the DTMF memory encoder in advance.
(p. 48)
É Push [Y] or [Z] to select and set the desired
frequency.
• Selectable step increment is the same as the preset
tuning step. (p. 18)
• Pushing and holding [Y] or [Z] changes the fre-
quency continuously.
Ñ Push [ECLR] to exit set mode.
NOTE: The offset frequency can be set in a memory chan-
nel temporarily. However, the set contents are cleared
once the memory/call mode is selected. To store the offset
frequency permanently, overwrite the channel information.
SET
B
Содержание
- Instruction manual 1
- Vhf uhf fm transceiver 1
- Cautions 2
- Do not 2
- Explicit definitions 2
- Important 2
- R warning never 2
- Be careful 3
- Do not 3
- Unpacking 3
- Basic operation 20 23 4
- Call channel operation 34 35 4
- Important i explicit definitions i cautions i unpacking ii table of contents iii 4
- Installation 9 14 4
- Memory operation 29 33 4
- Panel description 1 8 4
- Repeater operation 24 28 4
- Scratch pad memory 36 37 4
- Setting a frequency 15 19 4
- Table of contents 4
- Dtmf memory encoder 46 49 5
- Maintenance 67 69 5
- Mode arrangement 73 74 5
- Options 71 72 5
- Other functions 59 66 5
- Pocket beep and tone squelch 50 52 5
- Priority watch 44 45 5
- Scan operation 38 43 5
- Specifications 70 5
- Wireless operation 53 58 5
- I front panel 6
- Panel description 6
- Panel description 7
- I function display 8
- Panel description 8
- Panel description 9
- D data jack pin assignments 10
- I rear panel 10
- Panel description 10
- I microphone 11
- Panel description 11
- I microphone keypad 12
- Panel description 12
- Panel description 13
- D separate installation 14
- D single body installation 14
- I installation methods 14
- Installation 14
- I location 15
- I single body installation 15
- Installation 15
- I microphone connection 16
- I separate installation 16
- Installation 16
- D when using the mb 65 17
- I optional mb 58 installation 17
- Installation 17
- I battery connection i dc power supply connection 18
- Installation 18
- D antenna connector 19
- D antenna location 19
- D antenna splitter 19
- I antenna installation 19
- Installation 19
- Pl 259 connector 19
- D operating band 20
- D turning power on off 20
- D vfo and memory modes 20
- I preparation 20
- Setting a frequency 20
- D frequency lock 21
- D microphone keypad lock 21
- I lock functions 21
- Setting a frequency 21
- I using the tuning dial 22
- I using y z switches 22
- Setting a frequency 22
- I tuning step selection 23
- Setting a frequency 23
- I using the keypad 24
- Setting a frequency 24
- Basic operation 25
- I receiving 25
- Basic operation 26
- I audio mute function 26
- I avionics band receiv 26
- I monitor function 26
- Basic operation 27
- Caution 27
- I selecting the output power 27
- I transmitting 27
- Basic operation 28
- I one touch ptt function 28
- I accessing a repeater 29
- Repeater operation 29
- D 1750 hz tone 30
- D dtmf tones 30
- Repeater operation 30
- I subaudible tones 31
- Repeater operation 31
- I offset frequency 32
- Repeater operation 32
- D frequency range and offset direction 33
- D setting the auto repeater function on off 33
- I auto repeater 33
- Repeater operation 33
- U s a version only 33
- D using the keypad 34
- D using the tuning dial 34
- D using y z switches 34
- I general description 34
- I memory channel selection 34
- Memory operation 34
- I programming a memory channel 35
- Memory operation 35
- I programming a memory channel via the microphone 36
- Memory operation 36
- I transferring memory contents 37
- Memory operation 37
- I memory clearing 38
- Memory operation 38
- Call channel operation 39
- I calling up a call channel 39
- I transferring call channel contents 39
- Call channel operation 40
- I programming a call channel 40
- I calling up a scratch pad memory 41
- I what is a scratch pad memory 41
- Scratch pad memory 41
- I transferring scratch pad memory contents 42
- Scratch pad memory 42
- I scan types 43
- Scan operation 43
- D operation 44
- D pre operation 44
- I scan start stop 44
- Scan operation 44
- I programming scan edges 45
- Scan operation 45
- I programming scan edges via the microphone 46
- Scan operation 46
- I skip channel setting 47
- Scan operation 47
- I scan resume condition 48
- Scan operation 48
- I priority watch types 49
- Priority watc 49
- I priority watch operation 50
- Priority watch 50
- Dtmf memory encode 51
- I clearing the dtmf memory contents 51
- I programming a dtmf code 51
- Dtmf memory encoder 52
- I programming a dtmf code via the microphone 52
- D transmitting a dtmf memory channel directly 53
- D using the dtmf memory function automatic transmission 53
- Dtmf memory encoder 53
- I transmitting a dtmf code 53
- Dtmf memory encoder 54
- I dtmf speed 54
- D calling a waiting station using pocket beep 55
- D waiting for a call from a specific station 55
- I pocket beep operation 55
- Pocket beep and tone squelc 55
- I tone squelch operation 56
- Pocket beep and tone squelch 56
- I tone scan 57
- Pocket beep and tone squelch 57
- I connection 58
- I hm 90 58
- Optional ex 1759 and hm 90 58
- Wireless operation 58
- I ex 1759 installation 59
- Wireless operation 59
- I hm 90 switches 60
- Wireless operation 60
- D keypad 61
- Wireless operation 61
- Wireless operation 62
- D microphone address 63
- D microphone dip switch 63
- I microphone address 63
- Wireless operation 63
- I beep tones on off 64
- I time out timer 64
- Other functions 64
- I auto power off 65
- I cooling fan setting 65
- Other functions 65
- I display dimmer 66
- I microphone f 1 f 2 keys 66
- Other functions 66
- I demonstration display 67
- I squelch delay 67
- Other functions 67
- D data speed 68
- I packet operation 68
- Other functions 68
- D 1200 bps packet operation 69
- Other functions 69
- D 9600 bps high speed packet operation 70
- Other functions 70
- D adjusting the transmit signal output from the tnc 71
- Other functions 71
- I troubleshooting 72
- If your transceiver seems to be malfunctioning please check the following points before sending it to a service center 72
- Maintenance 72
- Maintenance 73
- Caution 74
- I fuse replacement 74
- I partial resetting 74
- I resetting the cpu 74
- Maintenance 74
- A 35 w 20 w 6 a 75
- General 75
- High mid high mid low 75
- Mid low mid high 75
- Receiver 75
- Specification 75
- Transmitter 75
- W 20 w 10 w 75
- W 4 a low 75
- D separation accessories 76
- D speakers 76
- Options 76
- D others 77
- D wireless microphone accessories 77
- Options 77
- Although the following chart refers mainly to the vhf band the transceiver has the same mode arrangement in the uhf band 78
- Dtmf memory 78
- M call tone 78
- Mode arrangement 78
- Set moni low 78
- Initial set mode set mode 79
- Mode arrangement 79
- 9 16 kamihigashi hirano ku osaka 547 japan 80
- Count on us 80
Похожие устройства
- Ardo DWC06E3W Инструкция по эксплуатации
- Texet TX-D6205A Black/Red Инструкция по эксплуатации
- Icom IC-2100H Инструкция по эксплуатации
- Ardo FLSN 103 EW Инструкция по эксплуатации
- Texet TX-258 White Инструкция по эксплуатации
- Icom IC-208H Инструкция по эксплуатации
- Jabra Drive Инструкция по эксплуатации
- Icom IC-2720H Инструкция по эксплуатации
- Canon 650D Body Инструкция по эксплуатации
- Icom IC-2800H Инструкция по эксплуатации
- Sony NEX-F3K+SEL1855 Silver Инструкция по эксплуатации
- Icom IC-910H Инструкция по эксплуатации
- Sony NEX-F3D+SEL1855+SEL16F28 Black Инструкция по эксплуатации
- Ardo FLN 106 EW Инструкция по эксплуатации
- Icom IC-P7A Инструкция по эксплуатации
- Sony NEX-F3Y+SEL1855+SEL55210 Black Инструкция по эксплуатации
- Icom IC-Q7A Инструкция по эксплуатации
- Panasonic DMC-GF5KEE-K Инструкция по эксплуатации
- Icom IC-T2H Инструкция по эксплуатации
- Panasonic DMC-GF5KEE-R Red Инструкция по эксплуатации