Icom IC-207H [35/80] I programming a memory channel

MEMORY OPERATION

■ Programming a memory channel

VFO mode settings, including the set mode contents such as

subaudible tone frequency, etc., can be programmed into a

memory channel.

➀ Set the desired frequency in VFO mode:

➥ Push [V/MHz] to select VFO mode.

➥ Set the frequency using the tuning dial.

➥ Set other data (e.g. tone frequency, etc.) if required.

➁ Push [S.MW] momentarily.

•“!” and the memory channel number ﬂash.

➂ Rotate the tuning dial to select the memory channel to be

programmed.

• Memory channels not yet programmed are blank.

➃ Push [S.MW] for 1 sec. to program.

• 3 beeps may sound.

• Memory channel number automatically advances when continu-

ing to push [S.MW] after programming.

✔ CONVENIENT

Memory programming can be performed in versatile ways

e.g. memory channel to the same (or different) memory chan-

nel, memory channel to the call channel, etc.

[EXAMPLE]: Programming 145.870 MHz into memory channel 20 via the remote controller.

Push and Rotate for setting

freq., etc.

Rotate

Push

momentarily

Push

for 1 sec. and continue pushing

BAND

S.MW

VFO