![Icom IC-207H [41/80] Scratch pad memory](/img/pdf.png)
Icom IC-207H [41/80] Scratch pad memory
![Icom IC-207H [41/80] Scratch pad memory](/views2/1074416/page41/bg29.png)
SCRATCH PAD MEMORY
8
36
■ What is a scratch pad
memory?
During VFO operation, the transceiver automatically memo-
rizes operating frequency information, separate from regular
memory channels, when transmitting on a new frequency.
The 5 previously operated frequencies for each band can be
recalled (L1 to L5 appear for simplex frequencies; r1 to r5 ap-
pear for duplex frequencies.
NOTE: When memory mode is selected, the frequency is
not programmed into a scratch pad.
■ Calling up a scratch pad
memory
➀ Select the call channel by pushing [M/CALL] once or twice.
(A large “C” appears.)
• To transmit on the scratch pad memory, select the desired band
in advance.
➁ Rotate the tuning dial to select a scratch pad memory.
• Previously transmitted frequency and one of “L1–L5” appears for
simplex memories (rotate [DIAL] left); one of “r1–r2” appears for
duplex memories (rotate [DIAL] right).
• When first applying power or after CPU resetting, scratch pad
memories contain no data and therefore cannot be accessed.
➂ Push [V/MHz] or [M/CALL] to exit the scratch pad memory.
• The 5th scratch pad memory will be cleared when trans-
mitting on a new frequency. If the transmit frequency is
already stored in a scratch pad memory, the scratch pad
memory is not cleared but the order is changed.
• When transmitting on a scratch pad memory, the scratch
pad memory becomes the 1st scratch pad memory and
the order is changed.
Newest
Oldest
The oldest written frequency is cleared.
Order is changed if
transmitting on this
channel.
HI
1
9
5
HI
1
9
5
HI
1
9
5
HI
1
9
5
HI
1
9
5
HI
1
9
5
Содержание
- Instruction manual 1
- Vhf uhf fm transceiver 1
- Cautions 2
- Do not 2
- Explicit definitions 2
- Important 2
- R warning never 2
- Be careful 3
- Do not 3
- Unpacking 3
- Basic operation 20 23 4
- Call channel operation 34 35 4
- Important i explicit definitions i cautions i unpacking ii table of contents iii 4
- Installation 9 14 4
- Memory operation 29 33 4
- Panel description 1 8 4
- Repeater operation 24 28 4
- Scratch pad memory 36 37 4
- Setting a frequency 15 19 4
- Table of contents 4
- Dtmf memory encoder 46 49 5
- Maintenance 67 69 5
- Mode arrangement 73 74 5
- Options 71 72 5
- Other functions 59 66 5
- Pocket beep and tone squelch 50 52 5
- Priority watch 44 45 5
- Scan operation 38 43 5
- Specifications 70 5
- Wireless operation 53 58 5
- I front panel 6
- Panel description 6
- Panel description 7
- I function display 8
- Panel description 8
- Panel description 9
- D data jack pin assignments 10
- I rear panel 10
- Panel description 10
- I microphone 11
- Panel description 11
- I microphone keypad 12
- Panel description 12
- Panel description 13
- D separate installation 14
- D single body installation 14
- I installation methods 14
- Installation 14
- I location 15
- I single body installation 15
- Installation 15
- I microphone connection 16
- I separate installation 16
- Installation 16
- D when using the mb 65 17
- I optional mb 58 installation 17
- Installation 17
- I battery connection i dc power supply connection 18
- Installation 18
- D antenna connector 19
- D antenna location 19
- D antenna splitter 19
- I antenna installation 19
- Installation 19
- Pl 259 connector 19
- D operating band 20
- D turning power on off 20
- D vfo and memory modes 20
- I preparation 20
- Setting a frequency 20
- D frequency lock 21
- D microphone keypad lock 21
- I lock functions 21
- Setting a frequency 21
- I using the tuning dial 22
- I using y z switches 22
- Setting a frequency 22
- I tuning step selection 23
- Setting a frequency 23
- I using the keypad 24
- Setting a frequency 24
- Basic operation 25
- I receiving 25
- Basic operation 26
- I audio mute function 26
- I avionics band receiv 26
- I monitor function 26
- Basic operation 27
- Caution 27
- I selecting the output power 27
- I transmitting 27
- Basic operation 28
- I one touch ptt function 28
- I accessing a repeater 29
- Repeater operation 29
- D 1750 hz tone 30
- D dtmf tones 30
- Repeater operation 30
- I subaudible tones 31
- Repeater operation 31
- I offset frequency 32
- Repeater operation 32
- D frequency range and offset direction 33
- D setting the auto repeater function on off 33
- I auto repeater 33
- Repeater operation 33
- U s a version only 33
- D using the keypad 34
- D using the tuning dial 34
- D using y z switches 34
- I general description 34
- I memory channel selection 34
- Memory operation 34
- I programming a memory channel 35
- Memory operation 35
- I programming a memory channel via the microphone 36
- Memory operation 36
- I transferring memory contents 37
- Memory operation 37
- I memory clearing 38
- Memory operation 38
- Call channel operation 39
- I calling up a call channel 39
- I transferring call channel contents 39
- Call channel operation 40
- I programming a call channel 40
- I calling up a scratch pad memory 41
- I what is a scratch pad memory 41
- Scratch pad memory 41
- I transferring scratch pad memory contents 42
- Scratch pad memory 42
- I scan types 43
- Scan operation 43
- D operation 44
- D pre operation 44
- I scan start stop 44
- Scan operation 44
- I programming scan edges 45
- Scan operation 45
- I programming scan edges via the microphone 46
- Scan operation 46
- I skip channel setting 47
- Scan operation 47
- I scan resume condition 48
- Scan operation 48
- I priority watch types 49
- Priority watc 49
- I priority watch operation 50
- Priority watch 50
- Dtmf memory encode 51
- I clearing the dtmf memory contents 51
- I programming a dtmf code 51
- Dtmf memory encoder 52
- I programming a dtmf code via the microphone 52
- D transmitting a dtmf memory channel directly 53
- D using the dtmf memory function automatic transmission 53
- Dtmf memory encoder 53
- I transmitting a dtmf code 53
- Dtmf memory encoder 54
- I dtmf speed 54
- D calling a waiting station using pocket beep 55
- D waiting for a call from a specific station 55
- I pocket beep operation 55
- Pocket beep and tone squelc 55
- I tone squelch operation 56
- Pocket beep and tone squelch 56
- I tone scan 57
- Pocket beep and tone squelch 57
- I connection 58
- I hm 90 58
- Optional ex 1759 and hm 90 58
- Wireless operation 58
- I ex 1759 installation 59
- Wireless operation 59
- I hm 90 switches 60
- Wireless operation 60
- D keypad 61
- Wireless operation 61
- Wireless operation 62
- D microphone address 63
- D microphone dip switch 63
- I microphone address 63
- Wireless operation 63
- I beep tones on off 64
- I time out timer 64
- Other functions 64
- I auto power off 65
- I cooling fan setting 65
- Other functions 65
- I display dimmer 66
- I microphone f 1 f 2 keys 66
- Other functions 66
- I demonstration display 67
- I squelch delay 67
- Other functions 67
- D data speed 68
- I packet operation 68
- Other functions 68
- D 1200 bps packet operation 69
- Other functions 69
- D 9600 bps high speed packet operation 70
- Other functions 70
- D adjusting the transmit signal output from the tnc 71
- Other functions 71
- I troubleshooting 72
- If your transceiver seems to be malfunctioning please check the following points before sending it to a service center 72
- Maintenance 72
- Maintenance 73
- Caution 74
- I fuse replacement 74
- I partial resetting 74
- I resetting the cpu 74
- Maintenance 74
- A 35 w 20 w 6 a 75
- General 75
- High mid high mid low 75
- Mid low mid high 75
- Receiver 75
- Specification 75
- Transmitter 75
- W 20 w 10 w 75
- W 4 a low 75
- D separation accessories 76
- D speakers 76
- Options 76
- D others 77
- D wireless microphone accessories 77
- Options 77
- Although the following chart refers mainly to the vhf band the transceiver has the same mode arrangement in the uhf band 78
- Dtmf memory 78
- M call tone 78
- Mode arrangement 78
- Set moni low 78
- Initial set mode set mode 79
- Mode arrangement 79
- 9 16 kamihigashi hirano ku osaka 547 japan 80
- Count on us 80
Похожие устройства
- Ardo DWC06E3W Инструкция по эксплуатации
- Texet TX-D6205A Black/Red Инструкция по эксплуатации
- Icom IC-2100H Инструкция по эксплуатации
- Ardo FLSN 103 EW Инструкция по эксплуатации
- Texet TX-258 White Инструкция по эксплуатации
- Icom IC-208H Инструкция по эксплуатации
- Jabra Drive Инструкция по эксплуатации
- Icom IC-2720H Инструкция по эксплуатации
- Canon 650D Body Инструкция по эксплуатации
- Icom IC-2800H Инструкция по эксплуатации
- Sony NEX-F3K+SEL1855 Silver Инструкция по эксплуатации
- Icom IC-910H Инструкция по эксплуатации
- Sony NEX-F3D+SEL1855+SEL16F28 Black Инструкция по эксплуатации
- Ardo FLN 106 EW Инструкция по эксплуатации
- Icom IC-P7A Инструкция по эксплуатации
- Sony NEX-F3Y+SEL1855+SEL55210 Black Инструкция по эксплуатации
- Icom IC-Q7A Инструкция по эксплуатации
- Panasonic DMC-GF5KEE-K Инструкция по эксплуатации
- Icom IC-T2H Инструкция по эксплуатации
- Panasonic DMC-GF5KEE-R Red Инструкция по эксплуатации