Moxa WDR-3124A-EU-T [36/94] Operation mode

WDR-3124A Web Console Configuration

3-13

Operation Mode

The WDR-3124A supports two operation modes—AP and Client-Router.

The following table provides the field descriptions.

Field Description Default setting

Wireless enable This field is available in AP mode.

Select Enable to activate the RF (radio frequency) module.

Enable

Operation mode Select AP to set the WDR-3124A to operate as a wireless access

point.

Select Client-Router to set the WDR-3124A to operate as a

wireless client router.

Basic Wireless Settings

You can add or edit an SSID in the Basic Setting Selection screen. An SSID is a unique identifier that wireless

networking devices use to establish and maintain wireless connectivity. Multiple access points on a network or

sub-network can use the same SSIDs.

To configure an SSID, complete the following steps:

1. Click Wireless > WLAN > Basic Wireless Settings.

2. Click Add SSID.

3. Click Save.

4. Click Edit to display the Basic Wireless Settings screen as shown in the following figure.