Moxa WDR-3124A-EU-T [45/94] Advanced wireless settings

WDR-3124A Web Console Configuration

3-22

Advanced Wireless Settings

Additional wireless-related parameters are presented in this section to help you set up your wireless network

in detail.

The following table describes the fields.

Field Description Default setting

Multicast rate Select a fixed multicast rate for the transmission of broadcast and

multicast packets.

This setting is useful in an environment where multicast video

streaming is transmitted using the wireless medium, provided that

wireless clients are capable of handling the configured rate.

Guard interval Guarding interval ensures that distinct transmissions do not

interfere with one another.

You can select the guarding interval manually for Wireless-N

connections. The two options are Short (400ns) and Long (800ns).

800ns

Transmission power Select a target power to mask the maximum output power.

Refer to the product datasheet for the maximum output for each

transmission rate.

Beacon interval The field is available for AP mode.

Select the frequency interval of the beacon.

100 (ms)

DTIM interval Select how often the WDR-3124A sends out a Delivery Traffic

Indication Message (DTIM).

Fragmentation

threshold

Enter the maximum packet size allowed before the system splits

and

creates a new packet.

2346

RTS threshold Enter the maximum packet size allowed before the system

coordinates transmission and reception to ensure efficient

communication.

2346

Noise protection If the WDR-3124A is installed in an environment with excessive

radio noise, select Enable to activate the interference or noise

cancelling feature to improve wireless transmission.

Disable

WMM WMM (Wi-Fi Multimedia) is a QoS standard for WLAN traffic.

Select Enable to give priority to voice and video data when

communicating with WMM-supported wireless clients.

Note: WMM is always enabled in 802.11n mode.

Enable