Autel MOT PRO [87/157] Www autel russia ru

NOTE: AUTEL accepts no responsibility for any accident or

injury arising from servicing the ABS/SRS systems. When

interpreting DTCs retrieved from the vehicle, always follow

the manufacturer’s recommendation for repair.

NOTE: All software screens shown in this manual are

examples, actual test screens may vary for each vehicle being

tested. Observe the menu titles and onscreen instructions to

make correct option selections.

Please follow these steps to start the ABS/SRS diagnostic testing

procedure:

1) Turn the ignition off.

2) Locate the vehicle’s 16-pin Data Link Connector (DLC).

3) Plug the scan tool cable connector into the vehicle’s DLC.

4) Turn the ignition on but do not start the engine.

5) Turn on the scan tool and wait for the Main Screen to appear.

6) Use the UP/DOWN scroll button or LEFT/RIGHT scroll

button to select AbsSrs in the Main Screen. (Figure 3.1)

12.1 Vehicle Selection

There are three ways for users to enter the vehicle information in the

scan tool.

A. Select vehicle step by step

In this mode, the scan tool will communicate with the vehicle and a

series of vehicle identification screens appears for user to identify

the vehicle (These may include vehicle Model, Year, Type and

Vehicle Part etc. for selection.).

On each screen that appears, use the UP/DOWN scroll button to

select the correct option and then press the OK button. Do this until

the vehicle is completely identified. (Taking Fiat as an example)

www.autel-russia.ru