Nec PX700W [137/244] Using on screen menu

123

5. Using On-Screen Menu

NOTE:

• When[ON]isselectedfor[CONTROLID],theprojectorcannotbeoperatedbyusingtheremotecontrolthatdoesnotsupport

theCONTROLIDfunction.(Inthiscasethebuttonsontheprojectorcabinetcanbeused.)

• Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

•PressingandholdingtheENTERbuttonontheprojectorcabinetfor10secondswilldisplaythemenuforcancelingtheControl

ID.

Assigning or Changing the Control ID

1. Turnontheprojector.

2. PresstheIDSETbuttonontheremotecontrol.

 TheCONTROLIDscreenwillbedisplayed.

 IftheprojectorcanbeoperatedwiththecurrentremotecontrolID,the[ACTIVE]

willbedisplayed.Iftheprojectorcannotbeoperatedwiththecurrentremotecontrol

ID,the[INACTIVE]willbedisplayed.Tooperatetheinactiveprojector,assignthe

controlIDusedfortheprojectorbyusingthefollowingprocedure(Step3).

3. PressoneofnumerickeypadbuttonswhilepressingandholdingtheIDSET

buttonontheremotecontrol.

Example:

 Toassign“3”,pressthe“3”buttonontheremotecontrol.

 NoIDmeansthatalltheprojectorscanbeoperatedtogetherwithasingleremote

control.Toset“NoID”,enter“000”orpresstheCLEARbutton.

TIP:TherangeofIDsisfrom1to254.

4. ReleasetheIDSETbutton.

 TheupdatedCONTROLIDscreenwillbedisplayed.

NOTE:

•TheIDscanbeclearedinafewdaysafterthebatteriesarerundownorremoved.

•Accidentallypressinganyoneofthebuttonsoftheremotecontrolwillclearcurrentlyspecied

IDwithbatteriesremoved.