Asus rog rampage v extreme/u3.1 [137/230] Chapter 3

ASUS RAMPAGE V EXTREME

3-49

Chapter 3

Bootup NumLock State [On]

[On] Set the power-on state of the NumLock to [On].

[Off] Set the power-on state of the NumLock to [Off].

Wait For ‘F1’ If Error [Enabled]

[Disabled] Disables the function.

[Enabled] The system waits for the <F1> key to be pressed if an error occurs.

Option ROM Messages [Force BIOS]

This item allows you to set the display mode for Option ROM.

Conguration options: [Force BIOS] [Keep Current]

INT19 Trap Response [Immediate]

[Immediate] Executes the trap for INT19 immediately.

[Postponed] Executes the trap during legacy boot.

Above 4G Decoding [Disabled]

This item allows you to decode the 64-bit capable devices above 4G address space. Ensure

that your system supports 64-bit PCI decoding.

Conguration options: [Disabled] [Enabled]

Setup Mode [Advanced Mode]

[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST.

[EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST.

CSM (Compatibility Support Module)

Allows you to congure the CSM (Compatibility Support Module) items to fully support the

various VGA, bootable devices and add-on devices for better compatibility.

Launch CSM [Enabled]

[Auto] The system automatically detects bootable and add-on devices.

[Enabled] For better compatibility, enable the CSM to fully support the non-UEFI

driver add-on devices or the Windows® UEFI mode.

[Disabled] Disable the CSM to fully support the non-UEFI driver add-on devices

or the Windows® UEFI mode.

The following items appear when you set the Launch CSM to [Enabled].

Boot Device Control [UEFI and Legacy]

This item allows you to select the type of devices that you want to boot.

Conguration options: [UEFI and Legacy] [Legacy OpROM only] [UEFI only]