Pubert VARIO 70B TWK+ [10/100] Specifications

Pubert VARIO 70B TWK+ [10/100] Specifications
10
BRIGGSandSTRATTON.COM
Use a brush or dry cloth to remove debris from the finger guard (A) (Figure 13). Keep
linkage, springs and controls (B) clean. Keep the area around and behind the muffler (C)
free of any combustible debris.
Storage
WARNING
Fuel and its vapors are extremely flammable and explosive.
Fire or explosion can cause severe burns or death.
When Storing Fuel Or Equipment With Fuel In Tank
Store away from furnaces, stoves, water heaters or other appliances that have
pilot light or other ignition source because they can ignite fuel vapors.
Fuel System
Fuel can become stale when stored over 30 days. Stale fuel causes acid and gum
deposits to form in the fuel system or on essential carburetor parts. To keep fuel fresh,
use Briggs & Stratton Advanced Formula Fuel Treatment & Stabilizer, available
wherever Briggs & Stratton genuine service parts are sold.
For engines equipped with a FRESH START
®
fuel cap, use Briggs & Stratton FRESH
START
®
available in a drip concentrate cartridge.
There is no need to drain gasoline from the engine if a fuel stabilizer is added according
to instructions. Run the engine for 2 minutes to circulate the stabilizer throughout the fuel
system before storage.
If gasoline in the engine has not been treated with a fuel stabilizer, it must be drained into
an approved container. Run the engine until it stops from lack of fuel. The use of a fuel
stabilizer in the storage container is recommended to maintain freshness.
Engine Oil
While the engine is still warm, change the engine oil.
Troubleshooting
Need Assistance? Go to BRIGGSandSTRATTON.COM or call 1-800-233-3723 (in
USA).
Specifications
Engine Specifications
Model 130000
Displacement 12.69 ci (208 cc)
Bore 2.756 in (70 mm)
Stroke 2.13 in (54 mm)
Engine Oil Capacity 18 -- 20 oz (0.54 -- 0.59 L)
Tune-up Specifications *
Model 130000
Spark Plug Gap 0.030 in (0.76 mm)
Spark Plug Torque 180 lb-in (20 Nm)
Armature Air Gap 0.010 - 0.014 in (0.25 - 0.35 mm)
Intake Valve Clearance 0.004 - 0.006 in (0.10 - 0.15 mm)
Exhaust Valve Clearance 0.006 - 0.008 in (0.15 - 0.20 mm)
* Engine power will decrease 3.5% for each 1,000 feet (300 meters) above sea level and
1% for each 10 F(5.6 C) above 77 F(25 C). The engine will operate satisfactorily at
an angle up to 15. Refer to the equipment operator’s manual for safe allowable
operating limits on slopes.
Common S ervice Parts n
Service Part Part Number
Air Filter, Oil Bath 792472
Fuel Additive 5041, 5058
Spark Plug 491055
Spark Plug Wrench 816206
Spark Tester 19368
n We recommend that you see any Briggs & Stratton Authorized Dealer for all
maintenance and service of the engine and engine parts.
Not for
Reproduction

Содержание

Use a brush or dry cloth to remove debris from the finger guard A Figure 13 Keep linkage springs and controls B clean Keep the area around and behind the muffler C free of any combustible debris Specifications Engine Specifications Storage WARNING Fuel and Its vapors are extremely flammable and explosive Fire or explosion can cause severe burns or death When Storing Fuel Or Equipment With Fuel In Tank Store away from furnaces stoves water heaters or other appliances that have pilot light or other ignition source because they can ignite fuel vapors Fuel System Fuel can become stale when stored over 30 days Stale fuel causes acid and gum deposits to form in the fuel system or on essential carburetor parts To keep fuel fresh use Briggs Stratton Advanced Formula Fuel Treatment Stabilizer available wherever Briggs Stratton genuine service parts are sold For engines equipped with a FRESH START fuel cap use Briggs Stratton FRESH START available in a drip concentrate cartridge There is no need to drain gasoline from the engine if a fuel stabilizer is added according to instructions Run the engine for 2 minutes to circulate the stabilizer throughout the fuel system before storage If gasoline in the engine has not been treated with a fuel stabilizer it must be drained into an approved container Run the engine until it stops from lack of fuel The use of a fuel stabilizer in the storage container is recommended to maintain freshness Engine Oil While the engine is still warm change the engine oil Troubleshooting Need Assistance Go to BRIGGSandSTRATTON COM or call 1 800 233 3723 in USA 10 Model 130000 Displacement 12 69 ci 208 cc Bore 2 756 in 70 mm Stroke 2 13 in 54 mm Engine Oil Capacity 18 20 oz 0 54 0 59 L Tune up Specifications Model 130000 Spark Plug Gap 0 030 in 0 76 mm Spark Plug Torque 180 Ib in 20 Nm Armature Air Gap 0 010 0 014 in 0 25 0 35 mm Intake Valve Clearance 0 004 0 006 in 0 10 0 15 mm Exhaust Valve Clearance 0 006 0 008 in 0 15 0 20 mm Engine power will decrease 3 5 for each 1 000 feet 300 meters above sea level and 1 for each 10 F 5 6 C above 77 F 25 C The engine will operate satisfactorily at an angle up to 15 Refer to the equipment operator s manual for safe allowable operating limits on slopes Common Service Parts P Service Part Part Number Air Filter Oil Bath 792472 Fuel Additive 5041 5058 Spark Plug 491055 Spark Plug Wrench 816206 Spark Tester 19368 p We recommend that you see any Briggs Stratton Authorized Dealer for all maintenance and service of the engine and engine parts BRIGGSandSTRATTON COM