Zyxel NXC2500 [75/275] Chapter 8 ap management
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Zyxel NXC2500 [75/275] Chapter 8 ap management

Zyxel NXC2500 [75/275] Chapter 8 ap management
Chapter 8 AP Management
NXC CLI Reference Guide
75
[no] force vlan Sets whether or not the NXC changes the AP’s
management VLAN to match the one you configure using
the vlan sub-command. The management VLAN on the
NXC and AP must match for the NXC to manage the AP.
This takes priority over the AP’s CAPWAP client
commands described in Chapter 42 on page 249.
lan-provision lan_port {activate |
inactivate} pvid <1..4094>
Sets the NXC to enable or disable the specified LAN port
on the AP and configures a PVID (Port VLAN ID) for this
port.
lan_port: the name of the AP’s LAN port (lan1 for
example).
lan-provision vlan_interface
{activate | inactivate} vid <1..4094>
join lan_port {tag | untag} [lan_port
{tag | untag}] [lan_port {tag |
untag}]
Sets the NXC to create a new VLAN or configure an
existing VLAN. You can disable or enable the VLAN, set
the VLAN ID, assign up to three ports to this VLAN as
members and set whether the port is to tag outgoing
traffic with the VLAN ID.
vlan_interface: the name of the VLAN (vlan1 for
example).
[no] override slot_name {output-power
| radio-setting | ssid-setting}
Sets the NXC to overwrite the AP’s output power, radio or
SSID profile settings for the specified radio.
Use the no command to not overwrite the specified
settings.
[no] override lan-provision Sets the NXC to overwrite the AP’s LAN port settings.
Use the no command to not overwrite the specified
settings.
[no] override vlan-setting Sets the NXC to overwrite the AP’s LAN port settings.
Use the no command to not overwrite the specified
settings.
vlan <1..4094> {tag | untag} Sets the VLAN ID for the specified AP as well as whether
packets sent to and from that ID are tagged or untagged.
exit Exits the sub-command mode for the specified AP.
capwap ap ac-ip {primary_ac_ip}
{secondary_ac_ip}
Specifies the primary and secondary IP address or
domain name of the AP controller (the NXC) to which the
AP connects.
capwap ap ac-ip auto Sets the AP to use DHCP to get the address of the AP
controller (the NXC).
capwap ap add ap_mac [ap_model] Adds the specified AP to the NXC for management. If
manual add is disabled, this command can still be used; if
you add an AP before it connects to the network, then this
command simply preconfigures the management list with
that AP’s information.
capwap ap fallback disable Sets the managed AP(s) to not change back to associate
with the primary AP controller when the primary AP
controller is available.
capwap ap fallback enable Sets the managed AP(s) to change back to associate
with the primary AP controller as soon as the primary AP
controller is available.
capwap ap fallback interval <30..86400> Sets how often (in seconds) the managed AP(s) check
whether the primary AP controller is available.
Table 29 Command Summary: AP Management (continued)
COMMAND DESCRIPTION

Содержание

Похожие устройства

Скачать