Tp-Link T2600G-28MPS (TL-SG3424P) [350/379] Basic config

Max Frame Size TLV

The Maximum Frame Size TLV indicates the maximum frame

size capability of the implemented MAC and PHY.

Power Via MDI TLV The Power Via M

DI TLV allows network management to

advertise and discover the MDI power support capabilities of

the sending IEEE 802.3 LAN station.

The LLDP module is mainly for LLDP function configuration of the switch, including three

submenus: Basic Config, Device Info, Device Statistics and LLDP-MED.

16.1 Basic Config

LLDP is configured on the Global Config and Port Config pages.

16.1.1 Global Config

On this page you can configure the LLDP parameters of the device globally.

Choose the menu LLDP→Basic Config→Global Config to load the following page.

Figure 16-1 LLDP Global Configuration

The following entries are displayed on this screen:



Global Config

LLDP:

Enable/disable LLDP function globally.



Parameters Config

Transmit Interval:

Enter the interval for the local device to transmit LLDPDU to its

neighbors. The default value is 30 seconds.

Hold Multiplier:

Enter a multiplier on the Transmit Interval. It determines the

actual TTL (Time To Li

ve) value used in an LLDPDU. TTL = Hold

Multiplier * Transmit Interval. The default value is 4.

Transmit Delay:

Enter a value from 1 to 8192 in seconds to specify the time for

the local device to transmit LLDPDU to its neighbors after

changes occur so as

to prevent LLDPDU being sent frequently.

The default value is 2 seconds.

338