Kawasaki KLV1000 (2004) Инструкция по эксплуатации онлайн [195/529] 114642

3-108 ENGINE

NO.2 (REAR) CAMSHAFTS

• Install the No.2 (Rear) camshafts, intake and exhaust, in the

following procedure.

• From the position where the No.1 (Front) camshafts have now

been installed, rotate the generator rotor 360 degrees (1 turn)

and align the “F I T” line on the generator rotor with the index

mark of the valve timing inspection hole.

NOTE:

At this position, the engraved line

" on the cam drive idle gear/

sprocket is inside the cylinder head and not visible.

• Place the No.2 (Rear) camshafts, intake

 and exhaust

.

• Align the engraved lines

# on the camshafts so that it is par-

allel with mating surface of the cylinder head cover. Check

that the cam faces are located as shown.

• Install the dowel pins.

No. 2 (Rear) cylinder head

“I”

“E”