D-Link DGS-3312SR Инструкция по эксплуатации онлайн [165/290] 12494
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link DGS-3312SR Инструкция по эксплуатации онлайн [165/290] 12494

D-Link DGS-3312SR Инструкция по эксплуатации онлайн [165/290] 12494
DGS-3312SR Stackable Gigabit Layer 3 Switch
Parameter Description
Interface Name
Displays the of an IP interface previously configured on the Switch.
IP Address
The IP Address of the Interface name stated above.
Area ID
Allows the entry of an OSPF Area ID configured above.
Router Priority
Allows the entry of a number between 0 and 255 representing the OSPF priority of
the selected area. If a Router Priority of 0 is selected, the Switch cannot be elected
as the Designated Router for the network.
Hello Interval
Allows the specification of the interval between the transmission of OSPF Hello
packets, in seconds. Between 1 and 65535 seconds can be specified. The Hello
Interval, Dead Interval, Authorization Type, and Authorization Key should be the
same for all routers on the same network.
Dead Interval
Allows the specification of the length of time between the receipt of Hello packets
from a neighbor router before the selected area declares that router down. An
interval between 1 and 65535 seconds can be specified. The Dead Interval must be
evenly divisible by the Hello Interval.
State
Allows the OSPF interface to be disabled for the selected area without changing the
configuration for that area.
Auth Type
This field can be toggled between None, Simple, and MD5 using the space bar.
This allows a choice of authorization schemes for OSPF packets that may be
over the OSPF routing domain. None specifies no authorization. Simple
uses a simple password to determine if the packets are from an authorized OSPF
8-
character password that must be the same as a password configured on a neighbor
ted, the Auth Key ID field allows the specification of the
Key ID as defined in the MD5 configuration above. This must be the same MD5 Key
as used by the neighboring router.
exchanged
router. When Simple is selected, the Auth Key field allows the entry of an
OSPF router. MD5 uses a cryptographic key entered in the MD5 Key Setting
window. When MD5 is selec
Auth. Key ID
Enter a Key ID of up to 5 characters to set the Auth. Key ID for either the Simple
Auth Type or the MD5 Auth Type, as specified in the previous parameter.
Metric
This field allows the entry of a number between 1 and 65,535 that is representative
of the OSPF cost of reaching the selected OSPF interface. The default metric is 1.
DR State
A read only field describing the Designated Router state of the IP interface. This
field many read DR if the interface is the designated router, or Backup DR if the
interface is the Backup Designated Router. The highest IP address will be the
Designated Router and is determined by the OSPF Hello Protocol of the Switch.
DR Address
The IP address of the aforementioned Designated Router.
Backup DR Address
The IP address of the aforementioned Backup Designated Router.
Transmit Delay
A read only field that denotes the estimated time to transmit a Link State Update
Packet over this interface, in seconds.
Retransmit Time
A read only field that denotes the time between LSA retransmissions over this
interface, in seconds.
152

Содержание

Похожие устройства

Скачать