D-Link DGS-3312SR Инструкция по эксплуатации онлайн [72/290] 12494

D-Link DGS-3312SR Инструкция по эксплуатации онлайн [72/290] 12494
DGS-3312SR Stackable Gigabit Layer 3 Switch
The following Authenticator Settings parameters can be set:
Parameter Description
Unit
Allows you to specify a Switch in a Switch stack using that Switch’s Unit ID. The
number 15 indicates a Switch in standalone mode.
From/To
A consecutive group of ports may be configured starting with the selected port.
AdmDir exert control over communication in both receiving and transmitting directions, or just
the receiving direction.
From the pull-down menu, select whether a controlled Port that is unauthorized will
PortControl
This allows you to control the port authorization state.
on to the
e port
n of the
If Force_unauthorized is selected, the port will remain in the unauthorized state,
ignoring all attempts by the client to authenticate. The Switch cannot provide
authentication services to the client through the interface.
If Auto is selected, it will enable 802.1X and cause the port to begin in the
unauthorized state, allowing only EAPOL frames to be sent and received through the
port. The authentication process begins when the link state of the port transitions from
down to up, or when an EAPOL-start frame is received. The Switch then requests the
identity of the client and begins relaying authentication messages between the client
and the authentication server.
The default setting is Auto.
Select Force_authorized to disable 802.1X and cause the port to transiti
authorized state without any authentication exchange required. This means th
transmits and receives normal traffic without 802.1X-based authenticatio
client.
TxPeriod
Select the time to wait for a response from a supplicant (user) to send EAP
Request/Identity packets.
QuietPeriod
Select the time interval between authentication failure and the start of a new
authentication attempt.
SuppTimeout
Select the time to wait for a response from a supplicant (user) for all EAP packets,
except for the Request/Identity packets.
ServerTimeout
Select the length of time to wait for a response from a RADIUS server.
MaxReq
Select the maximum number of times to retry sending packets to the supplicant.
ReAuthPeriod
Select the time interval between successive re-authentications.
ReAuth
Enable or disable reauthentication.
Click Apply to implement changes made.
59

Содержание

Скачать