Icom IC-2820H [92/164] Erasing transferring bank contents

MEMORY MODE OPERATION

Contents of programmed memory banks can be cleared or

transferred to another bank.

INFORMATION: Even if the memory bank contents are

cleared, the memory channel contents still remain pro-

grammed.

qSelect the desired bank contents to be transferred or

erased from the band

(left or right).

➥ Push the desired band’s [M/CALL•MW] several times

to select memory mode.

➥ Push and hold the same band’s [MAIN•BAND] for

1 sec. then rotate the same band’s [DIAL] to select the

desired memory bank.

➥ Push the [MAIN•BAND] to select the bank then rotate

the [DIAL] to select the desired bank channel.

• Bank initial and bank channel stops blinking.

wPush and hold the same band’s [M/CALL•MW] for 1 sec.

•“X” indicator and the memory channel number blink

ePush [SEL](V/MHz•SCAN) (Left band’s) several times to se-

lect BANK, then push [EDIT](M/CALL•MW)

(Right band’s).

rRotate [DIAL] to select the desired bank initial

(A to Z) to

transfer.

• Select no indication, “– – – –,” when erasing the contents from

the bank.

tPush [>](M/CALL•MW) (Left band’s) then rotate the same

band’s [DIAL] to select a bank channel, if desired.

yPush [BACK](V/MHz•SCAN)

(Right band’s) to return to the

select memory write mode.

uPush and hold [S.MW](M/CALL•MW)

(Left band’s) for 1 sec.

to be transferred or erased.

iRepeat steps q to t for transferring or erasing an another

bank’s contents.

■ Erasing/transferring bank contents