Kawasaki KX250F (2004) [100/357] Http manuals magnamaniac com
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kawasaki KX250F (2004) [100/357] Http manuals magnamaniac com

Kawasaki KX250F (2004) [100/357] Http manuals magnamaniac com
FUEL SYSTEM 3-23
Carburetor
•
Remove the starter jet.
•
Check the slow jet for any damage.
If the slow jet is damaged, replace it with a new one.
•
Remove the throttle valve and jet needle.
•
Inspect the outside of the throttle valve and plate for
scratches and abnormal wear.
If it is badly scratched or worn, replace the throttle valve
or plate.
•
Inspect the inside of the carburetor body for these same
faults.
If it is badly scratched or worn, replace the entire carbu-
retor.
•
Check the jet needle for wear.
•
For the throttle sensor inspection, see the Electrical Sys-
tem chapter.
A worn jet needle should be replaced.
•
Clean the fuel and air passages with a high flash-point
solvent and compressed air.
Carburetor Assembly
•
Clean the disassembly parts before assembling.
○
Clean the fuel and air passages with a high flash-point
solvent and compressed air [A].
•
Set up the acceleration pump lever assembly as shown.
Acceleration pump lever [A]
Spring [B]
Push Rod Holder [C]
Adjusting Screw with Spring [D]
○
Fit the spring end on the stopper [E] of the push rod
holder.
•
Install the return spring [A] to the acceleration pump lever
[B].

Содержание

Похожие устройства

Скачать