Kawasaki KX250F (2004) [98/357] Http manuals magnamaniac com
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kawasaki KX250F (2004) [98/357] Http manuals magnamaniac com

Kawasaki KX250F (2004) [98/357] Http manuals magnamaniac com
FUEL SYSTEM 3-21
Carburetor
•
Remove the throttle sensor mounting bolt [A].
•
Before removing the throttle sensor [B], mark [C] the car-
buretor body and sensor so that it can be installed later in
the same position.
Carburetor Cleaning
WARNING
Clean the carburetor in a well-ventilated area, and
take care that there is no spark or f lame anywhere
near the working area; this includes any appliance
with a pilot light. Because of the danger of highly
flammable liquids, do not use gasoline or low flash
-point solvent to clean the carburetor.
•
Make sure the fuel tap is in t he OFF position.
•
Remove the carburetor (see Carburetor Removal).
•
Drain the fuel in the carburetor.
•
Disassemble the carburetor (see this chapter).
CAUTION
Do not use compressed air on an assem bled carbu-
retor, the float m ay be deformed by the pressure.
Remove as many rubber or plastic parts from the
carburetor as possible before cleaning the carbu-
retor with a cleaning solution. This will prevent
damage or deterioration of the parts. Do not use
a strong carburetor cleaning solution which could
attack the plastic parts; instead, use a mild h igh
flash-point cleaning solution safe for plastic parts.
Do not use wire or any other hard instrument to
clean carburetor parts, especially jets, as they may
be damaged.
•
Immerse all the metal parts in a carburetor cleaning solu-
tion.
•
Rinse the parts in water.
•
After the parts are cleaned, dry them with compressed air.
•
Blow through the air and fuel passages with compressed
air [A].
•
Assemble the carburetor, and install it on the motorcycle.

Содержание

Похожие устройства

Скачать