Kawasaki KX250F (2004) [106/357] Http manuals magnamaniac com
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kawasaki KX250F (2004) [106/357] Http manuals magnamaniac com

Kawasaki KX250F (2004) [106/357] Http manuals magnamaniac com
FUEL SYSTEM 3-29
Air Cleaner
Air Cleaner Housing Removal
•
Remove:
Side Covers (see Frame chapter)
Seat (see Frame chapter)
Silencer (see Engine Top End chapter)
Bolts and Rear Fender [A] (see Frame chapter)
Screws and Rear Flap [B] (see Frame chapter)
Rear Frame Bolts [C]
•
Loosen the air cleaner duct clamp [D].
•
Remove the rear frame.
•
Unscrew the bolt [A].
•
Remove the air cleaner housing [B].
Air Cleaner Housing Installation
•
Installation is the reverse of the removal.
•
Tighten the rear frame mounting bolts [A].
Torque - Rear Frame Mounting Bolts: 34 N·m (3.5 kgf·m, 25
ft·lb)
Element Removal
•
Remove the seat.
•
Remove the wing bolt [A] and pull out the element [B].
•
Stuff a clean, lint-free towel into the carburetor so no dirt
is allowed to enter the carburetor.
•
Wipe out the inside of the air cleaner housing with a clean
damp towel.
CAUTION
Check inside of the inlet tract and carburetor for
dirt. If dirt is present, clean the intake tract and car-
buretor thoroughly. You may also need to replace
the element and seal the housing and inlet tract.
Element Installation
•
When installing the element, coat the lip of the element
with a thick layer of all purpose grease [ A] to assure a
complete seal against the air cleaner element base. Also,
coat the base where the lip of the element fits.
•
Apply grease to all connections and screw holes in the air
cleaner housing and intake tract.
•
Take out the towel from the carburetor securely.

Содержание

Похожие устройства

Скачать