Kawasaki KX250F (2004) [268/357] Http manuals magnamaniac com

BRAKES 12-19

Brake Disk

Brake Disc Inspection

•

Visually inspect the disc [A].

If it is scratched or damaged, replace the disc.

•

Measure the thickness of each disc at the point [B] where

it has worn the most.

Replace the disc if it has worn past the service limit.

Thickness

Front Rear

Standard:

2.85 ∼ 3.15 mm 3.85 ∼ 4.15 mm

(0.112 ∼ 0.124 in.) (0.152 ∼ 0.163 in.)

Service Limit: 2.5 mm (0.10 in.) 3.5 mm (0.14 in.)

•

Place a jack under the motorcycle so t hat the front/rear

wheel is raised off the ground.

Special Tool - Jack : 57001–1238

•

Set up a dial gauge against t he disc [A] as illustrated.

○

For the front disc, turn the handlebar fully to one side.

•

Measure the disc runout while rotating the wheel slowly

[B].

If the runout exceeds the service limit, replace the disc.

Runout

Standard: Not more than 0.25 mm (0.098 in. )

Service Limit: 0.3 mm (0.01 in.)