Kawasaki KX250F (2004) [32/357] Http manuals magnamaniac com
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kawasaki KX250F (2004) [32/357] Http manuals magnamaniac com

Kawasaki KX250F (2004) [32/357] Http manuals magnamaniac com
PERIODIC MAINTENANCE 2-13
Periodic Maintenance Procedures
•
Check the idle speed, using the engine revolution tester
[A] for high accuracy.
If the idle speed is out of specified range, adjust it.
Idle Speed:
Standard: 2 000 ± 50 r/min (rpm)
Idle Speed Adjustment
•
First, turn in the air screw [A] using the pilot screw ad-
juster [A], until it seats lightly, and back it out the specified
number of turns. (see specifications in the Fuel System
chapter)
Special Tool - Pilot Screw Adjuster, C : 57001–1292
(or Pilot Screw Adjuster, D : 57001–1588)
Pilot Screw Adjuster Adapter,
4:
57001–1371
•
Start the engine and warm it up thoroughly.
•
Turn the idle adjusting screw [B] until the idle speed is
correct.
To increase idle speed [C]
To decrease i dle speed [D]
•
Open and close the throttle a few times to make sure that
the idle speed is with in the specified range. Readjust if
necessary.
Air Cleaner Element Cleaning and Inspection
NOTE
○
In dusty areas, the element should be cleaned more
frequently than recommended interval.
○
After riding through rain or on muddy roads, the element
should be cleaned immediately.
○
Since repeated cleaning opens the pores of the ele-
ment, r eplace it with a new one in accordance with the
Periodic Maintenance Chart. Also, if there is a break in
the element material or any other dam age to the ele-
ment, replace the element with a new one.
WARNING
Clean the element in a w ell-ventilated area, and take
care that there are no sparks or flame anywhere
near the working area; this includes any appliance
with a pilot light. Because of the danger of highly
flammable l iquids, do not use gasoline or a l ow
flash-point solvent to clean the element.

Содержание

Похожие устройства

Скачать