Kawasaki KX250F (2004) [35/357] Http manuals magnamaniac com

2-16 PERIODIC MAINTENANCE

Periodic Maintenance Procedures

•

Check the coolant level. The coolant level [A] should be

at the bottom of the filler neck [B].

If the coolant level is low, add coolant through the filler

opening to the bottom of the filler neck. Install the cap.

Recommended coolant:

Permanent type of antifreeze (soft water and

ethylene glycol plus corrosion and rust inhibitor

chemicals for aluminum engines and radiators)

Water and coolant mixture ratio:

1:1 (water 50 %, Coolant 50 %)

Total amount:

1.2L(1.27USqt.)

Coolant Deterioration Inspection

•

Visually inspect the coolant.

If whitish cotton-like wafts are observed, aluminum parts

in the cooling system are corroded. If the coolant is

brown, iron or steel parts are rusting. In either case, flush

the cooling system.

If the coolant gives off an abnormal smell, check for a

cooling system leak. It may be caused by exhaust gas

leaking into the cooling system.

Radiator Hoses and Connections Inspection

○

The high pressure inside the radiator hose [A] can cause

coolant to leak [B] or the hose to burst if the line is not

properly maintained. Visually inspect t he hoses for signs

of deterioration. Squeeze the hoses. A hose should not

be hard and brittle, nor should it be soft or swollen.

Replace the hose if any fraying, cracks [C] or bulges [D]

are noticed.

•

Check that the hoses are securely connected and clamps

are tightened correctly.

Torque - Radiator Hose Clamp Screws: 1.5 N·m (0.15 kgf·m,

13 in·lb)