Kawasaki KX250F (2004) [13/357] Tightening torque

1-4 GENERAL INFORMATION

Before Servicing

Tightening Torque

Incorrect torque applied to a bolt, nut, or screw may

lead to serious damage. Tighten fasteners to the specified

torque using a good quality torque wrench.

Often, the tightening sequence is followed twice-initial

tightening and final tightening with torque wrench.

Force

Use common sense during disassembly and assembly,

excessive force can cause expensive or hard to repair dam-

age. When necessary, remove screws that have a non

-permanent locking agent applied using an impact driver.

Use a plastic-faced mallet whenever tapping is necessary.

Gasket, Oring

Hardening, shrinkage, or damage of both gaskets

and O-rings after disassembly can reduce sealing per-

formance. Remove old gaskets and clean the sealing

surfaces thoroughly so that no gasket material or other

material remains. Install new gaskets and replace used

O-rings when re-assembling

Liquid Gasket, Locking Agent

For applications that require Liquid Gasket or a Locking

agent, clean the surfaces so that no oil residue remains be-

fore applying liquid gasket or locking agent. Do not apply

them excessively. Excessive application can clog oil pas-

sages and cause serious dam age.

Press

For items such as bearings or oil seals that must be

pressed into place, apply small amount of oil to the con-

tact area. Be sure to maintain proper alignment and use

smooth movements when installing.