Kawasaki KX250F (2004) [312/357] Http manuals magnamaniac com

STEERING 14-11

Handlebar

•

Apply grease to the throttle cable upper end and clutch

cable upper end.

•

Apply a 2 stroke oil to the throttle grip inner wall [A].

•

Install the throttle grip assy so that the grip [A] is in as far

as it will go.

○

Position the throttle grip assy so that the horizontal parting

line [B] of the throttle case with punch mark [C] on the

handlebar.

○

Install the master cylinder so that the vertical parting line

[D] of the front master cylinder clamps w ith punch mark

[E] on the handlebar.

•

Install the handlebar clam p (see Steering Adjustment in

Periodic Maintenance chapter).

○

First tighten the rear clamp bolts [A], then, tighten the front

clamp bolts [B]. After tightening the bolts, a clearance [C]

will be created behind the clamp.

Torque - Handlebar Clamp Bolts: 25 N·m (2.5 kgf·m, 18

ft·lb)