D-Link DFL-1500 [35/271] From cli command line interface to configure dfl 1500 lan1 network settings

D-Link DFL-1500 [35/271] From cli command line interface to configure dfl 1500 lan1 network settings
DFL-900/1500 User Manual Chapter 2
System Overview
27
Step 2. Setup LAN1 IP information
Enter the IP Address and IP Subnet Mask with
192.168.40.254 / 255.255.255.0 and click
Apply.
Warning: After you apply the changed settings,
the network will be disconnected instantly since
the network IP address you are logging is
changed.
BASIC SETUP > LAN Settings > LAN1 Status
2.2.2 From CLI (command line interface) to configure DFL-1500 LAN1 network settings
Step 1. Use Console port to configure
DFL-1500
Use the supplied console line to connect the PC
to the Diagnostic RS-232 socket of the DFL-1500.
Start a new connection using the HyperTerminal
with parameters: No Parity, 8 Data bits, 1
stop bit, and baud rate 9600. Enter admin
for user name and admin for password to login.
After logging into DFL-1500, enter the commands
en“ to enter the privileged mode. Enter the
command “ip ifconfig INTF3
192.168.40.254 255.255.255.0” to change
the IP of the LAN1 interface.

Содержание

Скачать