D-Link DWC-1000 [132/368] Upnp setup

D-Link DWC-1000 User Manual 132

Section 5 - Advanced Network Conguration

UPnP setup

Note: This feature is only available when the DCS-1000-VPN license is activated.

Path:Network>LAN>UPnP

UniversalPlugandPlay(UPnP)isafeaturethatallowsthecontrollertodiscoverdevicesonthenetworkthatcan

communicatewiththecontrollerandallowforauto-conguration.IfanetworkdeviceisdetectedbyUPnP,the

controllercanopeninternalorexternalportsforthetracprotocolrequiredbythatnetworkdevice.Ifdisabled,

the controller will not allow for automatic device conguration and you may have to manually open/forward

informationoverthenetwork.Alargevaluewillminimizenetworktracbutcausedelaysinidentifying

newUPnPdevicestothenetwork.

5. EnteravalueforAdvertisement Time to Live. This is the number of steps a packet is allowed to propagate

beforebeingdiscarded.SmallvalueswilllimittheUPnPbroadcastrange.Adefaultof4istypicalfor

networks with a few number of switches.

6. Click Save.

7. YourentrywillbedisplayedintheUPnPPortMapList.Toeditordelete,right-clickanentryandselect

theactionfromthemenu.Repeatsteps3-6toaddmultipleentries.