D-Link DWC-1000 [245/368] D link dwc 1000 user manual 245

D-Link DWC-1000 User Manual 245

Section 7 - VPN Settings

Field Description

Policy Name EnterauniquenamefortheVPNPolicy.ThisnameisnotanidentierfortheremoteWAN/client.

Policy Type

Select either Manual or Auto.

• Manual:Allsettings(includingthekeys)fortheVPNtunnelaremanuallyinputforeachendpoint.No

third-party server or organization is involved.

• Auto:SomeparametersfortheVPNtunnelaregeneratedautomatically.ThisrequiresusingtheIKE

connections.TransportmodeisthedefaultmodeforIPSec,anditisusedforend-to-endcommunications

(forexample,forcommunicationsbetweenaclientandaserver).

IntheeventthattwoOptionportsareconguredtoconnecttoyourISP,selectthegatewaythatwillbe

usedasthelocalendpointforthisIPSectunnel.

Selectthetypeofidentierthatyouwanttoprovideforthecontrollerattheremoteendpoint(eitherIP

Address or FQDN[FullyQualiedDomainName])

Toggle to ONtoallowVPNclientsthatareconnectedtoyourcontrolleroverIPSectoreceiveanassigned

IPusingDHCP.

Local IP/Remote IP

Select the type of identier that you want to provide for the endpoint:

• Any: Species that the policy is for trac from the given end point (local or remote). Note that

selecting Any for both local and remote end points is not valid.

• Single:Limitsthepolicytoonehost.EntertheIPaddressofthehostthatwillbepartoftheVPN.

• Range:AllowscomputerswithinanIPaddressrangetoconnecttotheVPN.EntertheStartIPAddress

andEndIPAddressintheprovidedelds.

• Subnet:AllowsanentiresubnettoconnecttotheVPN.Enterthenetworkaddressandsubnetmask