D-Link DWC-1000 [23/368] Log in to the web management interface

D-Link DWC-1000 User Manual 23

Section 3 - Basic Conguration

Conguration procedures using the wireless controller’s web management interface are performed using one of

the following supported web browsers:

• MicrosoftInternetExplorer9.0orhigher

• MozillaFirefox23orhigher

• AppleSafari5.1.7orhigher(Windows)

• AppleSafari6.1.3orhigher(iOS)

• GoogleChrome26orhigher

Before you perform the following procedure:

• CongureyourPCrunningthewebbrowsertouseanIPaddressonthe192.168.10.xnetwork,witha

subnet mask of 255.255.255.0.

• Congureyourwebbrowsertoacceptcookies,promptforpop-ups,andallowsitestorunJavaScript.

• Upgradethermwareforyourwirelesscontroller(see“UpgradingFirmware”onpage20).

• Upgradethermwareforyouraccesspointsafteryouupgradethewirelesscontrollerrmware(referto

thedocumentationforyouraccesspoints).

To log in to the web management interface:

1. LaunchawebbrowseronthePC.

2. In the address eld of your web browser, type the IP address for the wireless controller web

managementinterface.ThedefaultIPaddressishttp://192.168.10.1. A login prompt will appear. If

theloginpromptdoesnotappear,see“WebManagementInterface”onpage340.

3. If you are logging in for the rst time, the default user name is admin and the default password is

admin. Both the user name and password are case-sensitive.

Note: We recommend that you change the password to a new, more secure password (see “Editing Users” on

page 203) and record it in Appendix A.