D-Link DWC-1000 [69/368] Configure power settings

D-Link DWC-1000 User Manual 69

Section 4 - Advanced WLAN Conguration

To congure Channel Algorithm setting:

1. Click Wireless > General > Power Algorithm > Power Setting tab.

2. You can congure the power as a percentage of maximum power, where the maximum power is the

minimum of power level allowed for the channel by the regulatory domain or the hardware capability.

Select Manual or AutoMode.

3. Enterthepowerchangethreshold.Thedefaultvalueis-85dBm.Thepowerchangesareinitiatedonlyif

the neighbor radio hears the transmitting radio with the signal strength equal or above the threshold.

The signal detected below the threshold is ignored.

4. If you select Manual, click on the Manual Power Adjustments tab. Here you can apply and start the

power algorithm on selected access points.

Congure Power Settings

Path:Wireless>General>PowerAlgorithm

YoucansetthepoweroftheAPradiofrequencytransmissionintheAP prole, thelocaldatabaseorinthe

RADIUSserver.ThepowerlevelintheAPproleisthedefaultlevelfortheAP,andthepowerwillnotbeadjusted

belowthevalueintheAPprole.ThesettingsinthelocaldatabaseandRADIUSserveralwaysoverridepower

setintheprolesetting.Ifyoumanuallysetthepower,thelevelisxedandtheAPwillnotusetheautomatic

power adjustment algorithm.