D-Link DWC-1000 [74/368] Enableordisablethesecurityoptionsasdesired refertothetablebelow andclick save
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link DWC-1000 [74/368] Enableordisablethesecurityoptionsasdesired refertothetablebelow andclick save

D-Link DWC-1000 [74/368] Enableordisablethesecurityoptionsasdesired refertothetablebelow andclick save
D-Link DWC-1000 User Manual 74
Section 6 - Securing Your Network
2. Enableordisablethesecurityoptionsasdesired(refertothetablebelow)andclickSave.
Field Description
Not Present in OUI Database
Test
This test checks whether the MAC address of the client is from a registered
manufacturer identied in the OUI database.
Not Present in Known Client
Database Test
Thistestcheckswhethertheclient,whichisidentiedbyitsMACaddress,islisted
intheKnownClientDatabaseandisallowedaccesstotheAPeitherthroughthe
Authentication Action of Grant or through the White List global action.
IftheclientisintheKnownClientDatabaseandhas anactionofDeny,orif the
action is Global Action and it is globally set to Black List, the client fails this test.
Congured Authentication Rate
Test
This test checks whether the client has exceeded the congured rate for transmitting
802.11 authentication requests.
Congured Probe Requests
Rate Test
This test checks whether the client has exceeded the congured rate for transmitting
probe requests.
Congured De-Authentication
Requests Rate Test
This test checks whether the client has exceeded the congured rate for transmitting
de‐authenticationrequests.
Maximum Authentication
Failures Test
This test checks whether the client has exceeded the maximum number of failed
authentications.
Authentication with Unknown
AP Test
ThistestcheckswhetheraclientintheKnownClientdatabaseisauthenticatedwith
anunknownAP.
Client Threat Mitigation
Selectenabletosendde‐authenticationmessagestoclientsthatareintheKnown
Clients database but are associated with unknown APs.The Authenticationwith
UnknownAPTestmustalsobeenabledinorderforthemitigationtotakeplace.
SelectdisabletoallowclientsintheKnownClientsdatabasetoremainauthenticated
withanunknownAP.
Known Client Database Lookup
Method
When the controller detects a client on the network it performs a lookup in the
Known Client database. Specify whether the controller should use the local or
RADIUSdatabasefortheselookups.
Known Client Database Radius
Server Name
IftheknownclientdatabaselookupmethodisRADIUSthenthiseldspeciesthe
RADIUSservername.
Rogue Detected Trap Interval
Specifytheinterval,inseconds,betweentransmissionsoftheSNMPtraptellingthe
administratorthat rogue APsare presentin the RF Scandatabase.Ifyousetthe
value to 0, the trap is never sent.
De-Authentication Requests
Threshold Interval
SpecifythenumberofsecondsanAPshouldspendcountingthede‐authentication
messages sent by wireless clients.
De-Authentication Requests
Threshold Value
If the controller receives more than specied messages during the threshold interval
the test triggers.
Authentication Requests
Threshold Interval
SpecifythenumberofsecondsanAPshouldspendcountingtheauthentication
messages sent by wireless clients.
Authentication Requests
Threshold Value
If the controller receives more than specied messages during the threshold interval
the test triggers.
Probe Requests Threshold
Interval
SpecifythenumberofsecondsanAPshouldspendcountingtheprobemessages
sent by wireless clients.
Probe Requests Threshold Value
Specify the number of probe requests a wireless client is allowed to send during the
threshold interval before the event is reported as a threat.
Authentication Failure
Threshold Value
Specify the number of 802.1X authentication failures a client is allowed to have
before the event is reported as a threat.

Содержание

Похожие устройства

Скачать