D-Link DWC-1000 [327/368] Configure snmp trap list

D-Link DWC-1000 User Manual 327

Section 9 - Maintenance

2. Set the security level.

• noAuthnoPriv:onlyrequiresausernamematchforauthentication

• authNoPriv:ProvidesauthenticationbasedontheMD5orSHAalgorithms.

• authPriv: Provides authentication based on the MD5 or SHA algorithms as well as encryption

privacywiththeDES256-bitstandard.

3. Click Save.

2. Click Add SNMP Trap.

3. Completetheinformationonelds(refertothetablebelow).

4. Click Save.

Congure SNMP Trap List

1. Go to Maintenance > Management > SNMP > SNMP Trap List tab.

Field Description

IP Address TheIPAddressoftheSNMPtrapagent.

Port

TheSNMPtrapportoftheIPaddresstowhichthetrapmessageswill

be sent.

Community

The community string to which the agent belongs. Most agents are

conguredtolistenfortrapsinthePubliccommunity.

Authentication Type TheSNMPversionusedbythetrapagent.Thechoicesarev1,v2c,orv3.